D ELECTRIC SUBMERSIBLE PUMPS FOR DRAINAGE
Electric submersible pumps designed for raising drainage water. Thanks to their amenity and sturdiness they are used for draining out excavations even under the harshest working conditions. Ideal for conveying clean or dirty water containing mud and sand, draining tanks and reservoirs, irrigating gardens and allotments.
TECHNICAL FEATURES:
| Capacity | l/s | 50 |
|---|---|---|
| Head | m | 40 |
| Power | kW | 7 |
M E MAT ELECTRIC SUBMERSIBLE PUMPS
Electric submersible pumps for dirty water suited for conveying sewage water with solid matter in suspension. The models in the MAT series are equipped with a shredder for residential and industrial drainage systems. Designed for high heads and small flows, they are the ideal solution to convey residential waste water in isolated areas far from the sewer mains.
TECHNICAL FEATURES:
| Capacity | l/s | 17 |
|---|---|---|
| Head | m | 34 |
| Power | kW | 2.2 |
KT+ ELECTRIC SUBMERSIBLE PUMPS
Electric submersible pumps with shredder for waste water. Impellers with front clearance adjustment, hardened stainless steel shredder, and high efficiency low temperature motors. Ideal for raising drainage water containing solid or fibrous matter from housing estates, single dwellings, campsites, hotels, service areas, supermarkets, farms, food preserve industries, paper industries and whenever solids bin suspension must be shredded. Innovative technical solutions ensure peak hydraulic efficiency and performance with the greatest reliability. Also available in an explosion proof version conforming to ATEX II 2G Exd IIB T4.
TECHNICAL FEATURES:
| Capacity | l/s | 4.7 |
|---|---|---|
| Head | m | 57 |
| Power | kW | 5.5 |
K+ DN 65 ÷ 200 K+ ELECTRIC SUBMERSIBLE PUMPS DN 65 ÷ 200
High-efficiency electric submersible pumps for raising waste water. Expressly designed for pumping
residential and industrial waste, in drainage lifting stations and water treatment plants. Single-and double-channel hydraulics or with retracted open impeller, ideal to convey liquids with high concentrations of solids. Impellers with anti-clogging device, double mechanical seal for motor protection, oil chamber and conductivity probe. High efficiency low temperature motors, for use in a dry chamber too. A modern and professional range to ensure the best results in cutting running and maintenance costs in residential and industrial systems. Also available in an explosion proof version conforming to ATEX II 2G Exd IIB T4 .
TECHNICAL FEATURES:
| Capacity | l/s | 160 |
|---|---|---|
| Head | m | 65 |
| Power | kW | 15 |
K+ DN 100 ÷ 250 K+ ELECTRIC SUBMERSIBLE PUMPS DN 100 ÷ 250
High-efficiency electric submersible pumps for raising waste water. Expressly designed for pumping residential and industrial waste, in drainage lifting stations and water treatment plants. Single-and double-channel hydraulics or with retracted open impeller, ideal to convey liquids with high concentrations of solids. Impellers with anti-clogging device, double mechanical seal for motor protection, oil chamber and conductivity probe. High efficiency low temperature motors, for use in a dry chamber too. A modern and professional range to ensure the best results in cutting running and maintenance costs in residential and industrial systems. Also available in an explosion proof version conforming to ATEX II 2G Exd IIB T4 .
TECHNICAL FEATURES:
| Capacity | l/s | 300 |
|---|---|---|
| Head | m | 66 |
| Power | kW | 35 |
K+ DN 150 ÷ 350 K+ ELECTRIC SUBMERSIBLE PUMPS DN 150 ÷ 350
High-efficiency electric submersible pumps for raising waste water. Expressly designed for pumping residential and industrial waste, in drainage lifting stations and treatment plants. Single- and multi-channel hydraulics, ideal to convey liquids with high concentrations of solids. Impellers with anti-clogging device, double mechanical seal for motor protection with oil chamber and conductivity probe. High efficiency motors, also with forced cooling system for use in a dry chamber. A modern and professional range to ensure the best results in cutting running and maintenance costs in residential and industrial systems. Also available in an explosion proof version conforming to ATEX II 2G Exd IIB T4.
TECHNICAL FEATURES:
| Capacity | l/s | 600 |
|---|---|---|
| Head | m | 55 |
| Power | kW | 62 |
K+ DN 250 ÷ 350 K+ ELECTRIC SUBMERSIBLE PUMPS DN 250 ÷ 350
High-efficiency electric submersible pumps for raising waste water. Expressly designed for pumping residential and industrial waste, in drainage lifting stations and treatment plants. Single- and multi-channel hydraulics, ideal to convey liquids with high concentrations of solids. Impellers with anti-clogging device, double mechanical seal for motor protection with oil chamber and conductivity probe. High efficiency motors, also with forced cooling system for use in a dry chamber. A modern and professional range to ensure the best results in cutting running and maintenance costs in residential and industrial systems.
TECHNICAL FEATURES:
| Capacity | l/s | 680 |
|---|---|---|
| Head | m | 65 |
| Power | kW | 180 |
K-KOMPACT MONOBLOC SURFACE ELECTRIC
Innovative series of surface monobloc electric pumps, in horizontal or vertical
version, for pumping residential and industrial waste water, coupled with standard electric motors. Compact, reliable, versatile, with easy maintenance and installation in dry chambers. Equipped with retracted vortex high efficiency hydraulics, single-channel or double-channel impeller. Supplied as standard with double mechanical seal on the shaft, barrier oil chamber and conductivity probe. The double support for the rotor ensures excellent resistance even in the harshest industrial applications.
TECHNICAL FEATURES:
| Capacity | l/s | 750 |
|---|---|---|
| Head | m | 65 |
| Power | kW | 200 |
LEVEL-START AIR-OPERATED LEVEL GAUGE
Level gauge mod. Level-Start has been designed to monitor the activation level of electric pumps installed to raise the waste water produced in urban and industrial areas and animal and breeding farms. It has proved to be particularly reliable for heavy-duty work where incrustations due to grease or detergents, or false signals caused by surface foam obstruct the regular operation of other regulating systems. Level-Start can either be supplied installed in the control and protection panel of the electric pump or as a separate unit in a fiberglass reinforced plastic housing with IP55 protection to install along with an already existing control device. The pneumostatically transmitted measuring system has no electric circuits or contacts in the tank and is therefore also suitable for installation in the presence of gas. One probe is sufficient to regulate the levels of several pumps. Periodical maintenance operations to clean the floats are no longer necessary.
VP BALL CHECK VALVE
The ball shutter check valve is extremely reliable in both vertical and horizontal installations thanks to its simple design and absence of mechanical parts. Its working principle is based on the free movement of the ball inside the valve body without the risk of jamming even if the pumped liquid contains suspended solids. When the pumps are running, the ball shutter, guided as required, will move to the side of the liquid flow leaving ample free passage space and reduced load loss. To guarantee perfect sealing and silent running, the ball is coated with nitrile rubber resistant to clean fresh or sea water, waste water or rainwater even with residual hydrocarbon.
MIXOFLUSH AUTOMATIC CLEANING SYSTEM FOR WASTEWATER LIFTING STATION
Since lifting stations have to remain efficient it is sometimes necessary to create an effective system capable to automatically clean the pits internally even in critical working conditions periods; the system have to grant the following effects:
- Keep moving the liquid so the solids, that naturally tend to settle on the bottom, especially in the zones where the fluid is calm, remain in suspension.
- Fluidize and blend oils and greases with wastewater, to prevent them from building up on the surface and forming froth and crusts.
STORMWATER COLLECTION,MANAGEMENT AND CONTROL
Rainwater disposal not only affects the safety of the natural bodies of water (rivers, canals, lakes, ponds, reservoirs, etc.) into which it flows, but the entire sewer network through to the local and district water treatment systems. Rainwater pollution is mainly caused by: substances that come straight from the actual soil and, to a lesser degree, from the atmosphere. Thus the first fraction of rain collected turns out to be polluted to a greater extent as it combines with all the pollutants that settle on the soil during dry weather. Use of storage tanks is becoming increasingly more widespread in an endeavour to reduce the environmental impact that occurs when first-flush rainwater is disposed of in natural bodies of water. The purpose of these tanks is to collect and hold the first fraction of the water produced by a heavy downpour, thus preventing it from flowing into natural bodies of water in an uncontrolled way. However, the solids in first-flush rainwater settle at the bottom of these tanks and make them considerably difficult to manage. These solids contain a certain organic fraction that helps microorganisms and bacteria to proliferate in the presence of high temperatures and humidity, leading to the production of gas and unpleasant odours. This means that cleaning and the removal of these sediment is of prime importance when it comes to servicing primary rain storage tanks.
CMD HORIZONTAL SUBMERSIBLE MIXERS WITH DIRECT DRIVE
Horizontal submersible mixers with direct drive. For applications in nitrification/de-nitrification, sludge treatment and storage, disinfection tanks and industrial mixing. Available with cast-iron construction and stainless steel propeller or in a completely stainless steel version – AISI 316. Galvanic separation system for standard components providing effective protection against corrosion.
TECHNICAL FEATURES:
| Capacity | l/s | 316 |
|---|---|---|
| Power | kW | 3 |
CMR HORIZONTAL SUBMERSIBLE MIXERS WITH GEAR
Horizontal submersible mixers with epicyclical gear between electric motor and propeller. For applications in nitrification/de-nitrification, sludge treatment and storage, disinfection tanks and industrial mixing. Galvanic separation system for standard components providing effective protection against corrosion. Available also in explosion proof version conforming to ATEX II 2G Ex d IIB T5 Gb.
TECHNICAL FEATURES:
| Capacity | l/s | 1860 |
|---|---|---|
| Power | kW | 18.5 |
CMB HORIZONTAL SUBMERSIBLE FLOW ACCELERATORS
Flow accelerators for applications in nitrification/denitrification tanks, disinfection and industrial mixing. Propeller with self-cleaning blades made of a composite material with high hydraulic efficiency. Galvanic separation system for standard components providing effective protection against corrosion.
TECHNICAL FEATURES:
| Capacity | l/s | 4890 |
|---|---|---|
| Power | kW | 4 |
CMB HORIZONTAL SUBMERSIBLE FLOW ACCELERATORS
Flow accelerators for applications in nitrification/denitrification tanks, disinfection and industrial mixing. Propeller with self-cleaning blades made of a composite material with high hydraulic efficiency. Galvanic separation system for standard components providing effective protection against corrosion.
TECHNICAL FEATURES:
| Capacity | l/s | 4890 |
|---|---|---|
| Power | kW | 4 |
OXY-FLOW AERATION ASSEMBLY
Aeration assembly for processes of oxygenation and homogenization in treatment plants for residential, industrial and livestock farming waste water, in fish farming and aerated ponds. Also ideal for rainwater collection basins. Compact and simple to install, they are suitable for use in tanks of any shape and size.
TECHNICAL FEATURES:
| Power | kW | 25 |
|---|
