New Holland

300 Series Skid Steer Loaders L318

Specification

  • Dimensions
    Maximum hinge pin height mm4055
    Top of ROPS mm3048
    Length with out attachment mm1974
    Length with bucket* mm2877
    Dump angle °2685
    Maximum dump height* mm3585
    Maximum reach mm52
    Wheelbase mm2214 @ 45°
    Ground clearance mm946
    Angle of departure °35
    Over all width (Spec tire) mm87

     

  • Specification
    Boom geometry1128
    Rated operating capacity 50% (ROC) kg178
    Tipping load kg23
    Lift cylinder breakout force kN924
    Bucket breakout force kN1642

     

  • Engine
    Engine manufacturerVertical
    Engine model818
    Displacement l1633
    Rated gross power output (SAE J1349) kW/hp11,7
    Peak Torque Nm24,7

     

  • Travel Speed
    Low range km/hPERKINS
    High range km/h404D-22T

     

  • Hydraulic System
    Pump flow rate STD l/min2,2
    Operating pressure STD bar44.7/60 @ 2800 rpm
    High flow option** l/min171 @ 1800 rpm
    High flow pressure option** bar12,7

     

  • Weights
    Operating weight kg18
    Shipping weight kg72

     

  • 300 Series Skid Steer Loaders  L320

    Specification

  • Dimensions
    Maximum hinge pin height mm4080
    Top of ROPS mm3073
    Length with out attachment mm1998
    Length with bucket* mm2902
    Dump angle °2685
    Maximum dump height* mm3569
    Maximum reach mm52
    Wheelbase mm2239 @ 45°
    Ground clearance mm921
    Angle of departure °34
    Over all width (Spec tire) mm87
  • Specification
    Boom geometry1128
    Rated operating capacity 50% (ROC) kg203
    Tipping load kg25
    Lift cylinder breakout force kN924
    Bucket breakout force kN1755

     

  • Engine
    Engine manufacturerVertical
    Engine model905
    Displacement l1814
    Rated gross power output (SAE J1349) kW/hp15,3
    Peak Torque Nm32,5
  • Travel Speed
    Low range km/hPERKINS
    High range km/h404D-22T

     

  • Hydraulic System
    Pump flow rate STD l/min2,2
    Operating pressure STD bar44.7/60 @ 2800 rpm
    High flow option** l/min171 @ 1800 rpm
    High flow pressure option** bar12,7

     

  • Weights
    Operating weight kg18
    Shipping weight kg85
  • B-Series Backhoe Loaders B90B

    Specification

  • Engine
    Model8045.45.748
    TypeTurbocharged aftercooler
    Displacement / Compression ratio3.9 l / 18.3:1
    Bore/Stroke104 x 115 mm
    Horsepower Maximum (ISO 14396)96 hp rated at 2200 rpm
    Torque maximum (ISO 14396)420 Nm rated at 1300 rpm
    Engine speed - Rated speed full load2200

     

  • Power Train
    Transmission 
    Type 
    Gear 
    1st - 2nd - 3rd - 4th Speed

     

  • Hydraulic System
    Type 
    Flow rate 
    Pressure

     

  • General Dimensions (2WD/4WD)
    Dump height mm 
    Load over height mm 
    Hinge pin height mm 
    Reach at ground mm 
    Reach at full height-bucket dumped mm 
    Below ground level-dig depth mm 
    Dump angle ° 
    Maximum lifting capacity @ max height kg 
    Cab height mm 
    Overall width mm 
    Overall operating weight kg 
    Wheel base mm 
    Minimum ground clearance mm 
    Overall height (Transport) mm 
    Width over bucket (Transport) mm 

     

  • B-Series Backhoe Loaders B80B

    Specification

  • Engine
    Model8045.45.748
    TypeTurbocharged aftercooler
    Displacement / Compression ratio3.9 l / 18.3:1
    Bore/Stroke104 x 115 mm
    Horsepower Maximum (ISO 14396)96 hp rated at 2200 rpm
    Torque maximum (ISO 14396)420 Nm rated at 1300 rpm
    Engine speed - Rated speed full load2200
  • Power Train
    TransmissionCARRARO 2WD TLB1 or 4WD TLB1
    TypePower Shuttle with 4 forward and 4 reverse travel gears
    GearForward - Reverse (speed km/h)
    1st - 2nd - 3rd - 4th Speed6.2/7.4 - 10/12 - 20.7/24.8 - 39.2/NR

     

  • Hydraulic System
    TypeClosed center with double gear pump
    Flow rate145 lpm @ 2200 rpm
    Pressure210 bar

     

  • General Dimensions (2WD/4WD)
    Dump height mm2650/ 2720
    Load over height mm3205/ 3275
    Hinge pin height mm3510/ 3580
    Reach at ground mm1980
    Reach at full height-bucket dumped mm800/ 760
    Below ground level-dig depth mm94/ 98
    Dump angle °47/ 45
    Maximum lifting capacity @ max height kg3425
    Cab height mm2850/ 2870
    Overall width mm2277
    Overall operating weight kg7350
    Wheel base mm2175
    Minimum ground clearance mm400
    Overall height (Transport) mm3820/ 3800
    Width over bucket (Transport) mm2277
  • C-Series Backhoe Loaders B90C

    Specification

  • Engine
    Make and ModelFPT NEF F4GE9484C
    Injection systemDirect Mechanical
    Emissions levelTier 3
    # of cylinders4
    Bore / Stroke104 mm x 132 mm
    Displacement / Compression ratio4.5 ltr / 17.5 to 1
    Engine rated Power (ISO 14396)72 KW (97 hp) @ 2200 rpm
    Maximum torque (ISO 14396)420 Nm @ 1250 rpm
    Engine speeds2200 rpm (rated speed at full load) / 950-1000 rpm (low speed at no load)

     

  • Transmission
    TypePowershuttle 2WD or 4WD
    ModelCarraro TLB1 MPB 2WD or 4WD
    Forward travel speeds (kph)6 - 10 - 21 - 40
    Reverse travel speeds (kph)7 - 12 - 26 - 47

     

  • Hydraulic System
    TypeLoad sensing closed center hydraulic system with twin gear pump
    Flow (@ 2200 rpm)156 l/min
    Pressure205 bar

     

  • Overall Dimensions
    Boom height (transport position) mm3800 / 3882
    Wheel base mm2183
    Cab height mm2859
    Overall width with standard loader bucket mm2340 / 2394
    Minimum ground clearence mm337
    Operating weight range Kg8010 - 9220
  • Wheel Loaders 12D EVO

    Specification

  • Engine
    Brand and modelFPT
    TypeDiesel, 4-stroke, direct injection
    Net power (SAE J1349)127 hp (95 kW)
    Maximum torque443 Nm a 1500 rpm
  • Electrical System
    Tension24 V
    Alternator70 A
    Batteries2 - 12 V (each)

     

  • Hydraulic System
    BombGear
    Peak flow140 L/min
    Maximum pressure2.756 psi
    Distributor176 L

     

  • Brakes
    Of serviceMulti-disc on the side reducers
    ParkingDisc brake, spring applied, hydraulically released, mounted on transmission output shaft, mechanically actuated.
  • Graders F170B

    Specification

  • Specification
    Engine power164 kW/220 hp
    Operating weight15587 kg

     

  • Road Roller V110PD

    Specification

  • Operation Information
    Operating weight12450
    Front axle load7850 
    Rear axle load4600 
    Static linear load front31 Kg/cm

     

  • Vibration System
    ​Vibration stage1
    Frequency30
    Amplitude1,3
    Centrigufal force25830
    Maximum force applied33680

     

     

  • Dimentions
    Horizontal distance from center of drum to center of tire3003mm
    Overall width of the machine2324mm
    Rear overhang1560mm
    Rear tire diameter1560mm
    Drum diameter1500mm
    Silencer height from ground level2561mm
    Total height of the machine (in transport)3389mm
    Ground clearance382mm
    Overall length of the machine5557mm
    Side overhang87mm
    Overall width of the drum32mm
    Rear departure angle36

    ​​